Building and Commercial
175 MM (7") Submersibles Pumpsets
“TEXMO” 7″ SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance. A wide range of pumps are available to meet diverse operating requirements. Motors are water lubricated and feature robust thrust bearings. Good quality materials are used to obtain a reliable life and provide maintenance free service.
| PARTICULARS | DETAILS |
|---|---|
| Bore size min. | 7”and above |
| Power Range | 2.0 to 30.0 HP |
| Voltage Range | 340V- 440V, AC Three phase , 50Hz |
| Voltage Range | 180V – 240V, AC Single phase , 50Hz (Upto 7.5 HP) |
| Speed | 2900 RPM |
| Motor Type | Water filled and water cooled Induction motor |
| Coupling | Key ( Upto 25 HP) / NEMA |
| Head | Maximum 500 M |
| Discharge | Maximum 1600 LPM |
| No of Stages | Maximum 60 |
| Liquid temperature | Maximum 33ºC |
| Operating Pressure | 50 bar |
| Sand content in water | 50 PPM Max. |
| Pump Models | AT,JT,AT-SS |
| Motor Models | ST/NST/EMS/EMS* |
- Water extraction from bores of diameter 7″ (175 mm) and above
- Irrigation systems for Agriculture including Drip and Sprinkler systems.
- Pressure boosting applications
- Domestic water supply to large residences and multi storied apartments
- Water supply to commercial establishments like Hotels, Lodges and Hospitals
- Dewatering of mines
- Industrial water supply
- 7″ Pumps to suit 6″ motor
- Energy efficient motor
- Usage of Low watt In-house Manufactured Stampings
- Low operating cost (Low Power Consumption)
- Water lubricated motor with easily rewindable stator
- Energy Efficient Radial flow models
- Rubber diaphragm provided at the bottom of the motor to compensate thermal expansion of water
- Wide voltage operation to suit all seasons
- Low, Medium, High Voltage operation Motors to suit particular field condition
- Pumpsets with special materials are available on request
| MOTOR | |
|---|---|
| Stator Shell | Stainless steel |
| Thrust Bearing | Carbon with stainless steel segments |
| Journal Bearings | Bronze/ Carbon |
| Diaphragm | Nitrile Rubber |
| Shaft | Carbon steel with SS extension |
| Strainers | Stainless steel |
| PUMP | ||
|---|---|---|
| MP | SMPS | |
| Pump shaft | Stainless steel | Stainless steel |
| Valve casing | Cast Iron | Cast Iron |
| Inlet bracket | Cast Iron | Cast Iron |
| Bowl | Cast Iron | Cast Iron |
| Impeller | Bronze | Stainless steel |