Building and Commercial
225 MM CI Sumersible Pumpsets
AQUAGROUP’S “TEXMO” 9″ SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance. A wide range of pumps are available to meet diverse operating requirements. Motors are water lubricated and feature robust thrust bearings. Good quality materials are used to obtain reliable life and provide easy service.
| PARTICULARS | DETAILS |
|---|---|
| Bore size min. | 9” (225mm) and above |
| Power Range | 5.0 to 60.0 HP |
| Voltage Range | 340V- 440V, AC Three phase , 50Hz |
| Speed | 2900 RPM |
| Motor Type | Water filled Water Cooled Induction motor |
| Coupling | Key / NEMA |
| Motor Types | ET,NET |
| Pump Types | MNS,SMNS |
| Head | Maximum 140 M |
| Discharge | Maximum 2600 LPM |
| Liquid temperature | Maximum 33ºC |
| Operating Pressure | 20 bar |
| Sand content in water | Maximum 50 PPM |
- Water extraction from bores of diameter 9” (225mm) and above
- Irrigation systems for Agriculture including Drip and Sprinkler systems.
- Pressure boosting applications
- Public water supply to large residential areas and multi storied apartments
- Water supply to commercial establishments like Hotels, Lodges and Hospitals
- Dewatering of mines
- Industrial water supply
- Fire fighting
- 9″ pumps to suit with 8″ motor
- Energy efficient motor
- Usage of Low watt In-house Manufactured Stampings
- Low operating cost (Low Power Consumption)
- Water lubricated motor with easily rewindable stator
- Energy Efficient mixed flow models
- Rubber diaphragm provided at the bottom of the motor to compensate thermal expansion of water
- Wide voltage operation to suit all seasons
- Low, Medium, High Voltage operation Motors to suit particular field condition
- 8″ Pumps with 6″ motor combination availble
- Pumpsets with special materials are available on request
| PARTICULARS | DETAILS |
|---|---|
| MOTOR | |
| Stator Shell | Stainless steel |
| Thrust Bearing | Carbon Coupling with SS segments |
| Journal Bearings | Phosphor Bronze/ Carbon |
| Diaphragm | Nitryle Rubber |
| Shaft | Carbon steel /Stainless steel |
| Strainers | Stainless steel |
| PUMP | |
| Pump shaft | Stainless steel |
| Discharge casing | Cast Iron / Bronze |
| Inlet bracket | Cast Iron / Bronze |
| Diffuser housing / Bowl | Cast Iron / Bronze |
| Diffuser | Cast Iron / Bronze |
| Impeller | Cast stainless steel/ Bronze |