Building and Commercial
75 MM 3 Submersible Pumpset
AQUAGROUP’S “TEXMO” 3″ SUBMERSIBLE PUMPSETS are easy to install, noise free, efficient and require minimum maintenance. A wide range of pumps are available to meet diverse operating requirements. Motors are water lubricated and feature robust thrust bearings. Good quality materials are used to obtain long life and provide easy service.
| PARTICULARS | DETAILS |
|---|---|
| Bore size min. | 3”and above |
| Power Range | 0.5 to 1.5 HP |
| Voltage Range | 220V- 240V, AC Single phase , 50Hz |
| Speed | 2900 RPM |
| Motor Type | Wet Type water filled water cooled Induction motor |
| Coupling | Key / NEMA |
| Head | Maximum 83 M |
| Discharge | Maximum 5500 LPH |
| Liquid temperature | Maximum 33ºC |
| Operating Pressure | Maximum 20 bar |
| Sand content in water | Maximum 50 PPM |
- Water extraction from bores of diameter 3″ (80mm) and above
- Water supply to commercial establishments like Hotels, Lodges and Hospitals
- Domestic water supply to large residential and multi-storied apartments
- Garden irrigation including Drip & Sprinkler systems
- Pressure boosting applications
- Energy efficient motor
- Water filled motor with easily rewindable stator
- Suitable for single phase 220 V, 50 Hz power supplies
- Corrosion resistant stainless steel stator casing
- Energy efficient radial flow pumps
- Wear resistant high strength engineering polymer impellers and diffusers with stainless steel inserts
- Stainless steel stage housings / Stainless steel pump shell
- Customized pumpsets are available on request
- Rubber diaphragm provided at the bottom of the motor to compensate thermal expansion of water
| PARTICULARS | DETAILS |
|---|---|
| MOTOR | |
| Stator Shell | Stainless steel |
| Thrust Bearing | Carbon with SS segments |
| Journal Bearings | Bronze/ Carbon |
| Diaphragm | Nitryle Rubber |
| Shaft | Stainless steel |
| Strainers | Stainless steel |
| Discharge | Maximum 5500 LPH |
| PUMP | |
| Pump shaft | Stainless steel |
| Discharge casing | Cast Iron / Bronze |
| Inlet bracket | Cast Iron / Bronze |
| Diffuser assembly | Engineering Plastic |
| Impeller | Engineering Plastic |
| Pump shell | Stainless steel |